LED lamps

Yes — LED H7/H4/H1/T10 use the same base and connector as halogen. No ballast, no rewiring. Some models need an adapter holder for H7, and position lights may need the CANBUS version or an error canceller.

A quality LED H7 gives a realistic 1.5–2× the light of a standard 55 W halogen, with lower draw and a 20,000+ hour life instead of 500–1000. Claims like "300 %" and "20,000 lumens" on cheap boxes are not real — we do not sell those.

Honestly: LED retrofits in halogen housings are not type-approved for public roads in most European countries, although they rarely cause trouble at inspection if the beam is aimed correctly. We recommend a headlight aim check after fitting.

LED draws a fraction of the current of a halogen bulb, so the CANBUS system assumes the bulb is missing. The fix is an error canceller (resistor/decoder) wired inline with the bulb — the warning disappears. For T10 and festoon a CANBUS version of the bulb is usually enough.

All LED and xenon bulbs come with a 12-month warranty. If a bulb fails within that time we replace it, no fuss. Halogen bulbs are consumables — the warranty covers manufacturing defects only.